[SI-LIST] : Output Buffer Need

BYERS ANDREW CLARK ([email protected])
Mon, 19 Jul 1999 14:00:13 -0600 (MDT)

Hello all,
I am currently searching far and wide for a clock fanout buffer
with the following characteristics:

1) edge rates faster than 3-4 volts per nanosecond
2) 4 or 5 output fanout (1 input)
3) low pin-to-pin skew (less than 300 ps)
4) 3.3V or 5V Vcc
5) max freq around 100MHz

These are the approximate specs I am looking for. The buffer will be used
on a test board environment, and we require a good, clean, fast edge rate. I
have seen several datasheets that come close, but either the edge rates are
not faster than 1V/ns or the part is not near production yet.

Any pointers would be very helpful here!

Thanks in advance,
Andy Byers

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Andy Byers
University of Colorado at Boulder
email: [email protected]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****