Re: [SI-LIST] : response to semiconductor I/O edge rates

D. C. Sessions ([email protected])
Fri, 16 Jul 1999 09:13:11 -0700

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Howard Johnson: "Re: [SI-LIST] : METASTABILITY IN FLIP FLOPS"
Previous message: D. C. Sessions: "Re: [SI-LIST] : response to semiconductor I/O edge rates"

Roy Leventhal wrote:
>
> Good points about etch length and edge rates.
>
> Somewhere else in the discussions the issue of programmable drive was also
> brought up. We are using progarmmable drive strength and a fixed series source
> terminator (selected by daughter card loading) in at least one instance.
>
> Does anyone know a signal integrity simulator that is up to snuff on IBIS 3.2
> especially with regard to the conventions on programmable devices and has
> automated the handling of such parts?

The EDA members of the IBIS committee report that their managements have
assigned IBIS 3.x support a low priority due to lack of customer demand.

-- D. C. Sessions [email protected]

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****

Next message: Howard Johnson: "Re: [SI-LIST] : METASTABILITY IN FLIP FLOPS"
Previous message: D. C. Sessions: "Re: [SI-LIST] : response to semiconductor I/O edge rates"