The last article was well received but I could use a lot more feedback.
Please don't
hold back - I'm sure any limitations will come out once an article goes
public.
Here is a new article:
http://softwareshop.edtn.com/netsim/si/crosstalk/
The interface for setting up coupled lines is to directly enter coupling
coefficients and
capacitances: if you have a circuit simulator you can check the results
that way. The
next article looks at it from a more RF point of view, using even and
odd impedances.
As with the last article it's best to respond with questions or comments
to:
mailto:[email protected]
Thanks,
Chris Rode
RCI
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****