On 22-Apr-99 D. C. Sessions wrote:
> Kassem Abdallah wrote:
>>
>> Hi All,
>>
>> I wonder if someone can briefly illustrate the pros and cons of using
>> Active low signals versus Active High signals.
>> - Form both views: a chip design and a board level design
>> - From the Drivers technology selection.
>> - From a Connection view:
>> (a) in case of a piont to point connection.
>> (b) multi-node connection.
>
> Since you need to be able to transition in both directions,
> there is no difference whatsoever.
>
> --
> D. C. Sessions
> [email protected]
>
> **** To unsubscribe from si-list: send e-mail to [email protected].
> In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****
----------------------------------
E-Mail: Lynne Green <[email protected]>
Date: 22-Apr-99
Time: 10:10:19
This message was sent by XFMail
----------------------------------
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****