Ted Davids
Cisco Systems
At 11:06 AM 4/14/99 -0700, you wrote:
>Everyone,
>
>I am looking for some tiny 50 Ohm co-ax suitable for re-work on prototype
>boards. Would like a very thin OD in the range of .075" - .1" or LESS.
>
>Best we have so far is an Alpha 917B or Pasternack RG-178. There has got to
>be something thinner out there that is not rigid or semi-rigid.
>
>Any good p/n's with mfgr name and a source also??
>
>Thanks in advance !
>
>John
>
>
>*********************************************************************
>John M. Fisher -- Cisco Systems -- [email protected]
> 170 W. Tasman Dr., Bldg G, San Jose CA 95134-1706
> __ _ _
> ________/// \_/ \________/ \ ____
> \/
>Signal Integrity Engineer, Enterprise Line of Business
>408-527-9186, Page 408-308-5501, Fax 408-526-5504, N6PFN
>*********************************************************************
>
>**** To unsubscribe from si-list: send e-mail to
>[email protected]. In the BODY of message put: UNSUBSCRIBE
>si-list, for more help, put HELP. si-list archives are accessible at
>http://www.qsl.net/wb6tpu/si-list ****
>
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****