[SI-LIST] : Long, uni-dir bus with multiple loads termination

Chris Bobek ([email protected])
Wed, 24 Mar 1999 15:12:05 -0800

I have an address bus that is 75ohm, and 19" long. There are
8 loads that are daisy-chained along the trace. The edge from
the driver (which is at one end) is 3ns.

I was wondering if I would be better off with a star pattern,
where each leg is short (less than 4"). Would this work and
not require any termination?

Thank you very much,

Chris

**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****