RE: [SI-LIST] : Ferrite Bead models
Michael Zhang ([email protected])
Tue, 23 Mar 1999 09:37:59 -0800
Another method is to use the tabulated voltage-controlled current
source,
which specifies the 1/amplitude and the phase of the bead impedance at a
range of frequency. You can extract both parameters from the bead data
sheet. This method works well in the frequency domain analysis, but not
particularly in the time domain. Personally, I use L-R-C parallel
circuit
for that.
-Michael T. Zhang
Platform Architecture Lab (PAL), Intel Corp
(503) 264-2301
**** To unsubscribe from si-list: send e-mail to [email protected]. In the BODY of message put: UNSUBSCRIBE si-list, for more help, put HELP. si-list archives are accessible at http://www.qsl.net/wb6tpu/si-list ****