RE: [SI-LIST] : Frequency based on rise time for drivers

From: Charles Grasso ([email protected])
Date: Thu May 24 2001 - 11:38:55 PDT

The formula refers to the bandwidth associated
with that rise time NOT just a single frequency.
S0 different drivers with different rise times
will exhibit different bandwidths.

Charles Grasso

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of richard hill
Sent: Thursday, May 24, 2001 11:32 AM
To: [email protected]
Subject: [SI-LIST] : Frequency based on rise time for drivers

I have often seen people estimating the frequency of a
driver based on the rise time for the driver using the
formula Freq = .35/Tr (This seems to be true for a
perfect sinusoid). There can be two different
drivers outputing signal at the same frequency but
different edge rates, won't this assumption be
invalid. Some times there is a big difference in the
edge rates of drivers running at the same frequency.
If we use the above formula and estimate the edge rates
using the frequency for the two drivers we will get
similar no.s.

Any comments.

Thanks in advance,
Rich

_______________________________________________________
Send a cool gift with your E-Card
http://www.bluemountain.com/giftcenter/

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected] In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:12:07 PDT