RE: [SI-LIST] : CRIETERIA FOR CHOOSING VALUE OF Z0

About this list	Date view	Thread view	Subject view	Author view

From: ruston, matt ([email protected])
Date: Tue May 22 2001 - 13:45:49 PDT

Next message: Larry Smith: "RE: [SI-LIST] : Accuracy"
Previous message: Ingraham, Andrew: "RE: [SI-LIST] : Analytical formula of characteristci impedance fo r microstrip and stripline"
Maybe in reply to: Chandan: "[SI-LIST] : CRIETERIA FOR CHOOSING VALUE OF Z0"

Chandan:

Hi. Check out http://www.ednmag.com/ednmag/reg/2000/09142000/19john.htm
It may help a bit.

Matt

-----Original Message-----
From: Chandan [mailto:[email protected]]
Sent: Tuesday, May 22, 2001 1:05 PM
To: SI FORUM
Subject: [SI-LIST] : CRIETERIA FOR CHOOSING VALUE OF Z0

Hi Everybody,

On all the motherboards that I have designed, the
chipset vendors specify the characteristic impedance
of the traces of the various signals involved. For
example, Intel specifies a value of 60 ohms for their
440BX chipset.
In the absence of such recommendations, on what basis
do I choose the value of characteristic impedance for
my traces?

Thanks,
Chandan

__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

Next message: Larry Smith: "RE: [SI-LIST] : Accuracy"
Previous message: Ingraham, Andrew: "RE: [SI-LIST] : Analytical formula of characteristci impedance fo r microstrip and stripline"
Maybe in reply to: Chandan: "[SI-LIST] : CRIETERIA FOR CHOOSING VALUE OF Z0"

About this list	Date view	Thread view	Subject view	Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:12:04 PDT