From: [email protected]
Date: Thu May 10 2001 - 10:45:49 PDT
Yes,
Right angle bends are:
A very high frequency, essentially microwave, effect. Provided you have low
voltages. Part of the concern is a legacy of higher voltages associated with
discrete BJTs, and before that, vacume tube RF circuits.
But, I understand chamfered or radius bends give better fab yields. So, what's
the real issue other than refining a rule of thumb?
Regards,
Roy
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:53 PDT