From: Larry Miller ([email protected])
Date: Mon Apr 30 2001 - 07:35:24 PDT
I realize that this is no help for THIS board, but PCB houses can and will
test for power to ground shorts BEFORE they get loaded. (They even have a
fancy little inspection sticker for it.) Well worth the money.
Larry Miller
-----Original Message-----
From: Bastola, Subas [mailto:[email protected]]
Sent: Saturday, April 28, 2001 8:56 PM
To: [email protected]
Subject: [SI-LIST] : Plane short
What is the best method to find the location of a short between the power
and gnd plane in a fully assembled board? Can TDR help?
Subas Bastola
Intel
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:47 PDT