Re: [SI-LIST] : Standard tolerance for 1.8V supplies

About this list Date view Thread view Subject view Author view

From: Khalid Ansari ([email protected])
Date: Mon Apr 23 2001 - 11:18:22 PDT


At 10:19 AM 4/23/01 -0700, Khalid Ansari wrote:
>Hi all,
>
>What is the standard practice in the industry for tolerance on 1.8V
>supply voltages. Does + 5% work or does it need to be pushed

I actually meant +/- 5%. I underlined the + in my previous email in
order to include the minus sign, I guess it didn't work.

>out further. I need this information in regards to some testing that
>I am currently doing.
>
>Thanks,
>Khalid
>
>
>
>
>
>
>
>
>
>
>**** To unsubscribe from si-list or si-list-digest: send e-mail to
>[email protected]. In the BODY of message put: UNSUBSCRIBE
>si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
>si-list archives are accessible at http://www.qsl.net/wb6tpu
>****

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:41 PDT