RE: [SI-LIST] : ripple on the power and ground rail

From: Ingraham, Andrew ([email protected])
Date: Wed Apr 18 2001 - 05:42:41 PDT

• Next message: Bernard Voss: "Re: [SI-LIST] : 1/2 oz copper on high speed boards"
• Previous message: e: "Re: [SI-LIST] : some board layout issues"
• Maybe in reply to: Saeen Malik: "[SI-LIST] : ripple on the power and ground rail"

> Secondly, I always thought that the power supply ripple would appear
> on the signal while driving high e.g. if there is a dip in the supply
> there
> should be a corresponding dip in the output signal. Well my measurements
> do
> not indicate that. ...
 
What DO your measurements indicate?

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Bernard Voss: "Re: [SI-LIST] : 1/2 oz copper on high speed boards"
• Previous message: e: "Re: [SI-LIST] : some board layout issues"
• Maybe in reply to: Saeen Malik: "[SI-LIST] : ripple on the power and ground rail"

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:38 PDT