WA5DJJ's ALL BAND QRSS GRABBER
Located in Las Cruces, New Mexico
Grid Square DM62ph
For 120min stacked images goto
https://swharden.com/qrss/plus/
160M GRABBER 20 Min SCAN
160M GRABBER 24 Hour SCAN
80M GRABBER 20 Min SCAN
80M GRABBER 24 Hour SCAN
40M GRABBER 20 Min SCAN
40M GRABBER 24 Hour SCAN
30M GRABBER 20 Min SCAN
30M GRABBER 24 Hour SCAN
20M GRABBER 20 Min SCAN
20M GRABBER 24 Hour SCAN
17M GRABBER 20 Min SCAN
17M GRABBER 24 Hour SCAN
15M GRABBER 20 Min SCAN
15M GRABBER 24 Hour SCAN
12M GRABBER 20 Min SCAN
12M GRABBER 24 Hour SCAN
10M REGION 2 GRABBER 20 Min SCAN
10M REGION 2 GRABBER 24 Hour SCAN
10M WORLD GRABBER 20 Min SCAN
10M WORLD GRABBER 24 Hour SCAN
6M GRABBER 20 Min SCAN
6M GRABBER 24 Hour SCAN
13.555 MHZ HFER#1 GRABBER 20 Min SCAN
13.555 MHZ HFER#1 GRABBER 24 Hour SCAN
Grabber Equipment: QRP-Labs QCX+ Transceiver used as the receiver, the antenna is a Butternut HF9V all band vertical with a 160M coil kit. The computer used for the Spectrum Analyzer is a Raspberry Pi 3B+ running LOPORAv5d.py software. This QRSS Super Grabber was built as a demonstration unit to show that inexpensive radio kits can do the demanding QRSS monitoring task very well:
dhassall "at" zianet "dot"com
The QCX+ Single band CW Transcivers are available from QRPLabs at:
https://www.qrp-labs.com/
The LOPORA Raspberry PI software is available at:
http://www.qsl.net/pa2ohh/11lop.htm