NVIS1

Parts List

3 ea 1.5" PVC pipes 5' long
2 ea 1.5" PVC coupling
2 ea 1.5" PVC cap
4 ea egg type insulators
3 ea brass round head screws (1/2" 6-32)
2 ea brass round head screw (1" 6-32)
4 ea lock washers for 6-32 screws
6 ea brass hex nuts (6-32)
4 ea flat #6 brass washers
1 ea SO-239 chassis connector with solder pot center pin
1 ea SO-239 coax crimp on type
4 ea stakes
1 ea round metal stake 3/4" by 18"
4 ea heavy solder lugs to fit brass screws (you "could" use crimp on type)
4 ea plexaglass pieces, 1" X 3", hole drilled through each end
~150' copper antenna wire (braided/woven type like Davis Flexweave works best)
~60' nylon rope (Parachute type cord works great and is inexpensive)
~17' RG-58 (coax for center mast feedline)