[SI-LIST] : Query on gtl+

About this list Date view Thread view Subject view Author view

From: [email protected]
Date: Tue Jun 05 2001 - 04:17:26 PDT


Hello SI List,

I have a query regarding one of the GTL+ standard's specifications.
The standard specifies that "the driver slew rate should be between
0.3V/ns and 0.8V/ns". Output slew of a driver also depends on the load it
is driving. So does the above specification gives a range of load which
it can support? And if there is any such range then what is that?

Thanks in anticipation
Rajesh Kaushik

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:12:14 PDT