From: Ashok Babu K ([email protected])
Date: Mon May 21 2001 - 22:03:27 PDT
Go to www.onsemi.com -> Technical Documents -> Document/CDROM Ordering ->
General Search
Then type HB205 MECL System Design handbook. You ll get the page to download
or order.
Or u can try this link directly.
http://www.onsemi.com/pub/frames/0,1245,onlineorder,00.html to go directly
to Search page.
Ashok.
----- Original Message -----
From: "Charles Grasso" <[email protected]>
To: "Ken Cantrell" <[email protected]>; "Degerstrom, Michael J."
<[email protected]>; <[email protected]>;
<[email protected]>
Sent: Monday, May 21, 2001 11:40 PM
Subject: RE: [SI-LIST] : MECL System Design Handbook
> Help -somewhere inall this I lost the link for the download.
> Can some one please resend??
>
> Thanks
> Charles Grasso
> Ansoft Corp..
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of Ken Cantrell
> Sent: Monday, May 21, 2001 9:58 AM
> To: Degerstrom, Michael J.; [email protected];
> [email protected]
> Subject: RE: [SI-LIST] : MECL System Design Handbook
>
>
> I certainly agree with you that the material is old news to the RF and
> Microwave guys, and that the handbook is an excellent resource, given that
> you keep the dates in mind.
>
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of Degerstrom, Michael
> J.
> Sent: Monday, May 21, 2001 9:39 AM
> To: [email protected]; [email protected];
> [email protected]
> Subject: RE: [SI-LIST] : MECL System Design Handbook
>
>
> Of course when they were using .1" wide traces back in the 70's
> they didn't have sub-100 ps edges to worry about. I can't see
> the relevance to the sharp corner effect to signal integrity
> concerns for any commercial applications for a couple of decades
> after that work was introduced. Maybe some of us will need to
> be concerned about corner effects now or in the near future.
> Also, my perceptions is that RF designers have to deal with the
> corner effects for their type of work. BTW, I think the handbook
> was and still is to some degree one of the best SI resources
> available.
>
> Mike
>
> > -----Original Message-----
> > From: Ken Cantrell [mailto:[email protected]]
> > Sent: Monday, May 21, 2001 9:37 AM
> > To: Ingraham, Andrew; [email protected]
> > Subject: RE: [SI-LIST] : MECL System Design Handbook
> >
> >
> > That was during the westward migration in covered wagons wasn't it?
> >
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]]On Behalf Of Ingraham, Andrew
> > Sent: Friday, May 18, 2001 8:53 PM
> > To: [email protected]
> > Subject: RE: [SI-LIST] : MECL System Design Handbook
> >
> >
> > > (Don't forget, the revision date on the hanbook, or at
> > least on the PDF
> > > I downloaded, is 1988.) ...
> >
> > My hardcopy version of the handbook (which I can't find right
> > now) is older
> > than that.
> >
> > Some of the research work is probably from the 1970's. Many
> > ECL boards back
> > then were simple double-sided (2-layer) with ground plane on
> > one side and
> > signals on the other, hand routed using sticky black tape for
> > the traces.
> >
> >
> >
> > **** To unsubscribe from si-list or si-list-digest: send e-mail to
> > [email protected]. In the BODY of message put: UNSUBSCRIBE
> > si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> > si-list archives are accessible at http://www.qsl.net/wb6tpu
> > ****
> >
> >
> >
> > **** To unsubscribe from si-list or si-list-digest: send e-mail to
> > [email protected]. In the BODY of message put: UNSUBSCRIBE
> > si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> > si-list archives are accessible at http://www.qsl.net/wb6tpu
> > ****
> >
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>
>
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>
>
> **** To unsubscribe from si-list or si-list-digest: send e-mail to
> [email protected]. In the BODY of message put: UNSUBSCRIBE
> si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
> si-list archives are accessible at http://www.qsl.net/wb6tpu
> ****
>
>
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:12:04 PDT