RE: [SI-LIST] : PCI bus impedance

About this list Date view Thread view Subject view Author view

From: Ingraham, Andrew ([email protected])
Date: Wed May 16 2001 - 06:00:07 PDT


> Hi! Thanks for all the feedback. From the feedback I can assume that if I
> do simulations with 50ohm impedance and the settle delay, propagation
> delay, flight time are within my PCI 33Mhz budget, then I can go ahead
> with 50ohm target impedance.
 
I would not assume that. You should simulate at the extremes of your board
impedance, not (just) with the target impedance.

Andy

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:58 PDT