[SI-LIST] : Daisy Chain topology - termination schemes

From: selvaraj subramanian ([email protected])
Date: Thu May 10 2001 - 23:17:08 PDT

• Next message: Inmyung Song: "Re: [SI-LIST] : Load - Capacitance"
• Previous message: selvaraj subramanian : "[SI-LIST] : Load - Capacitance"
• Next in thread: Rede, James: "RE: [SI-LIST] : Daisy Chain topology - termination schemes"
• Maybe reply: Rede, James: "RE: [SI-LIST] : Daisy Chain topology - termination schemes"
• Maybe reply: Ingraham, Andrew: "RE: [SI-LIST] : Daisy Chain topology - termination schemes"
• Reply: Nianci Wang: "Re: [SI-LIST] : Daisy Chain topology - termination schemes"

Hello all,

My simulations using XTK for most of the daisy chain topology is showing non-monotonicity on both the edges of the data/signal. I tried different termination strategies to remove the kink. But couln't.

What I saw was that the worst affected load is the first load from the driver?

Suggest me how to remove the non-monotonicity while using the daisy chain topology and is it ok if I bring that kink within the threshold levels.

thanks in advance.

regards,
Selva

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

• Next message: Inmyung Song: "Re: [SI-LIST] : Load - Capacitance"
• Previous message: selvaraj subramanian : "[SI-LIST] : Load - Capacitance"
• Next in thread: Rede, James: "RE: [SI-LIST] : Daisy Chain topology - termination schemes"
• Maybe reply: Rede, James: "RE: [SI-LIST] : Daisy Chain topology - termination schemes"
• Maybe reply: Ingraham, Andrew: "RE: [SI-LIST] : Daisy Chain topology - termination schemes"
• Reply: Nianci Wang: "Re: [SI-LIST] : Daisy Chain topology - termination schemes"

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:55 PDT