[SI-LIST] : Testing board stackup

About this list Date view Thread view Subject view Author view

From: [email protected]
Date: Thu May 10 2001 - 08:46:22 PDT

     
     Hi all,
     
     I have the following stackup in a testing board form mixed-signal
     devices:
     
     digital signal
     digital ground
     analog signal
     digital ground
     digital signal
     
     The digital signals have a risetime of 500ps. The analog signals are
     slow, nearly DC, but of little amplitude. When digital signals are
     switching, I have some noise induced in the analog traces. I suspect
     this is due to induced magnetic fields into analog traces.
     Is it due to wrong layer stackup ? If yes, how can I improve it ?
     
     Thank you for everything
     
     Diego Koch

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****

About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:53 PDT