[SI-LIST] : OPENING: Juniper Networks: Electrical/optical signal-integrity engineer

About this list Date view Thread view Subject view Author view

From: Heinz Blennemann ([email protected])
Date: Fri Mar 30 2001 - 16:11:58 PST


tech/recruit/jobreq_optic
[email protected]
OPENING: Juniper Networks: Electrical/optical signal-integrity engineer

POSITION:
  The engineer would be responsible for technology and signal integrity
  for both electrical and optical hardware/interfaces, including
  providing design rules to meet high speed timing and noise budgets
  optical and electrical technology/component selection
            - understand the communication standards (Sonet spec's)
            - drive technology issues necessary for selecting electro-optical
              transmitter/receiver modules (critical to Juniper's router
              interfaces)
            - test and verify in lab
            
  In the course of the project, to initially perform the necessary analysis,
  suggest and evaluate competing technologies. By developing noise and
  timing budgets, to propose routing rules. During the design phase,
  to run field solvers and SPICE to update the budgets and the resulting
  rules. Finally, in the lab, to perform measurements using
  high-speed scopes TDRs, and jitter analyzers to verify operation
  and to verify assumptions made in earlier parts of the design.
  
  Separately, a position for an electrical signal integrity engineer
  is also available.
  
EXPERIENCE:
Requires
        - BS in EE (MS or Ph.D. preferred)
        - a solid understanding of circuits, analog behavior, and
                transmission line fundamentals, and optics
        - demonstrated practical expertise in optical and electrical
                  measurements/design and signal integrity,
                in such areas as interconnect technolology, packaging,
                measurement techniques
        - ideally, experience in high-speed system design
                 in communications

COMPANY DESCRIPTION
Juniper Networks Inc., is a leading provider of next-generation Internet
infrastructure systems designed to meet the scalability, performance,
density, and compatibility requirements of rapidly evolving,
optically-enabled IP networks. The company's purpose-built M160 Internet
backbone router uses JUNOS software, ASICs, and wire-rate performance to
provide new Internet infrastructure solutions for service providers. The
M160 router is used by some of the world's leading service providers.
Juniper Networks service and manufacturing teams, and Internet engineers
support the M160 router. The company is headquartered in Sunnyvale,
California, with international offices in the UK, Japan and The
Netherlands. For more information on Juniper Networks, please visit the
Web site at http://www.juniper.net.

CONTACT INFORMATION

Please send resume to [email protected] .

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:22 PDT