From: Larry Miller ([email protected])
Date: Thu Mar 22 2001 - 13:41:43 PST
I have seen some high speed connector TDR plots where traces are routed
through pin fields on back/midplanes. This is similar to passing near a via,
even worse I would think. I have also done TDR's on our own boards.
The effect seems to be very small (a few % of 50 ohms) and of short duration
in time, which of course corresponds to very high frequencies (10's of GHz).
One view.
Larry Miller
-----Original Message-----
From: Patel, Bhavesh [mailto:[email protected]]
Sent: Wednesday, March 21, 2001 8:06 PM
To: SI_LIST (E-mail)
Subject: [SI-LIST] : How to model effect of vias on nearby traces?
Hi! I wanted to know how do I simulate the effect on the impedance..
reflection on a trace/signal when it is very close to a via. It does not go
thru the via but passes very close to it. Can I model this in HSPICE? And if
yes how/
Thanks in advance
Bhavesh
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****
This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:18 PDT