[SI-LIST] : Flex Characterization

About this list Date view Thread view Subject view Author view

From: BIBICHA ([email protected])
Date: Wed Mar 21 2001 - 14:09:18 PST


I would appreciate if any body can answer the following:

- Have you characterized a flex before? which tools does that?

What we are trying to do is create an IBIS, or .EBD file for a board. The flex connects two boards. One thing thou is that the flex consists of two wires connected together at the ends (No Planes).
Also, it has some nets that are signals and other that are power and ground.

Thank you in advance

Bouchra

_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com

**** To unsubscribe from si-list or si-list-digest: send e-mail to
[email protected]. In the BODY of message put: UNSUBSCRIBE
si-list or UNSUBSCRIBE si-list-digest, for more help, put HELP.
si-list archives are accessible at http://www.qsl.net/wb6tpu
****


About this list Date view Thread view Subject view Author view

This archive was generated by hypermail 2b29 : Thu Jun 21 2001 - 10:11:17 PDT