| Function | Keys | Description |
|---|---|---|
| VFO Reset | VFO/M>V + Power On | Resets both VHF and UHF VFOs |
| VHF VFO Reset | VFO + Band Sel V + Power On | Reset VHF VFO |
| UHF VFO Reset | VFO + Band Sel U + Power On | Reset UHF VFO |
| Memory Reset | MR/M + Power On | Resets memory |
| Chan Display | REV/STEP + Power On | Turn Channel display ON / OFF |
| DTSS Xmit Time | SHIFT/DTSS + Power On | Change DTSS code transmission time |
| Time Out Timer | LOW/DIM + Power On | Adjust tuning to select desired time out time |
| DTMF Remote | C Sel + Power On | Set remote control mode |
| Clone Mode | CALL + SHIFT/DTSS + Power On | Enter cloning Mode. Press PTT on master to clone. |
| If LOCK was set | ||
| - ALL LOCK ON | MHz/LOCK + Power On | Enables ALL LOCK |
| If ALL LOCK was set | ||
| - ALL LOCK OFF | MHz/LOCK + Power On | Disables ALL LOCK (only way out of ALL LOCK) |
| else | ||
| - uP Squelch | MHz/LOCK + Power On | Micro controlled squelch ON / OFF |
| Signal Squelch | Band Sel + Power On | Set remote control |
| Prog Mic PF Keys | Mic PF Keys + Power On | Press desired keys to assign to mic PF keys (CALL/VFO/MR/PF) |
| PF = Monitor | F + Power On | Assign PF key on Mic to Mon function (open squelch) |
| PF = Enter | F + VFO/M>V + Power On | Assign PF key on mic to ENTER function |
| Mem Allocation | F + MR/M + Power On | Change memory allocation |
| DTMF Memory | F + CALL + Power On | Change DTMF memory (Phone Dialer) |
| Tone Alert | F + SHIFT/DTSS + Power On | Toggle tone alert ON / OFF |
| Musical Freq Ind | F + TONE/T ALT + Power On | Toggle musical freq indication ON / OFF |
| Auto DIsplay Dim | F + LOW/DIM + Power On | Toggle auto display dimmer ON / OFF |
| Maintenance Modes | F + C Sel + Power On | Enter micro maintenance mode (dangerous!) |
| Function | Keys | Description |
|---|---|---|
| Simultaneous RX | F(S) + C Sel | Receive two signals in the same band simultaneously |
| Display Intensity | F(S) + LOW/DIM | Select the desired display intensity with the tuning control |
| Change CALL Chan | F(S) + CALL | Copies selected frequency into the CALL channel |
| Function | Keys | Description |
|---|---|---|
| Scan Hold Mode | F(L) + VFO/M>V | Toggle between Time and Carrier operated scan hold |
| Mem Chan Lockout | F(L) + MR/M | Lockout memory channel |
| Auto Power Off | F(L) + MHz/LOCK | Automatically turn off after 3 hours of inactivity toggle |
| Hang Time | F(L) + CALL | Selects hang time when in repeater mode |
| Program DTSS | F(L) + SHIFT/DTSS | Programs DTSS / paging codes |
| Tone Freq Select | F(L) + TONE/T ALT | Select desired tone freq with tuning control |
| Beep Level | F(L) + REV/STEP | Select desired beep level with tuning control |
| Repeater | F(L) + MUTE/ABC | Toggle repeater mode ON / OFF |
| Squelch Mode | F(L) + LOW/DIM | Toggle between noise and S-meter squelch |
| Speaker Select | F(L) + C Sel | Toggles external speaker mode |
| Band ON/OFF | F(L) + Band Sel | Toggles selected band ON / OFF |
| Function | Keys | Description |
|---|---|---|
| Mem Chan Clr | F(H) + MR/M | Erase memory channel |
| Prog Scan Limits | F(H) + MHz/LOCK | Select scan limit with tuning control then press MR/M |
| Check Scan Limits | F(H) + VFO/M>V | Check scan limit setting |
| VFO Low Limit | F(H) + CALL | Select VFO low limit then press any key |
| VFO High Limit | F(H) + SHIFT/DTSS | Select VFO high limit then press any key |
| Paging Answer | F(H) + TONE/T ALT | Toggles paging answerback ON / OFF |
| Paging Cancel | F(H) + REV/STEP | Cancel paging |
| AM / FM Detector | F(H) + MUTE/ABC | Toggles between AM and FM receive mode |
| S-Meter Sq Hold | F(H) + LOW/DIM | Select desired squelch hold time with tuning control |
| Mic Remote Control | F(H) + C Sel | Toggle remote control via mic ON / OFF |