This ZIPped archive contains the following files:

README.txt	This file
ad9835.gif	PCB image showing top layer and wire link
ad9835.prn	PCB artwork printer output file. Use 'copy ad9835.prn lpt1' from DOS to
		print it to transparency material in an HP LaserJet printer on LPT1.

The artwork has been 'mirrored' so that the print side will be in contact with the resist.

Cut the track under the C in 'IC1' if you want to separate the analogue and digital grounds. Add the wire link before you solder the chip!

Please email me if you have any problems/suggestions.

73, Leon (G1HSM)
leon_heller@hotmail.com



