Subject: Fw: 10 MHz VCXO PCB layout #2
Date: Sat, 17 Jan 2004 10:40:54 -0700
From: "Jerry Kleker" <w7qx@sedona.net>
To: "Zack Widup" <w9sz@prairienet.org>,
     "Woody" <kj4so@nc.rr.com>,
     "Wes Atchison" <wa5tku@earthlink.net>,
     "wb1fkf" <wb1fkf@rcn.com>,
     "Wayne Yoshida" <WYoshid1@irf.com>,
     "Warren J. Walsh" <mcw1wjw9@optonline.net>,
     "WA7CJO" <wa7cjo@futureone.com>,
     "wa1zms@arrl.net" <wa1zms@worldnet.att.net>,
     <w7gz@netzero.net>,
     "Travis Thomas" <etthom0@hotmail.com>,
     "Ted- WA8ULG" <ted@7vsb.com>,
     "Switzer, Emil" <Emil.Switzer@itt.com>,
     "Steven Kerns" <n3fti@yahoo.com>,
     "Rod Preston" <rpreston@netspace.net.au>,
     "Robert Roy" <robroyy@comcast.net>,
     "Robert McGwier" <rwmcgwier@comcast.net>,
     "Rene Barbeau" <barbeau_rene@yahoo.com>,
     <ReemeeRchrd@aol.com>,
     "Randy Bynum, NR6CA" <nr6ca@sbcglobal.net>,
     "Peter Freeman" <peter.freeman@sci.monash.edu.au>,
     "Paul Wade W1GHZ" <q.w1ghz@verizon.net>,
     "nu8i" <nu8i@cox.net>,
     <Mike73@aol.com>,
     "Mike Pinault" <w7ghz@centurytel.net>,
     "Mark" <gm4ism@blueyonder.co.uk>,
     "Luis Cupido" <cupido@mail.ua.pt>,
     "Lloyd Crawford" <n5gdb@texas.net>,
     "Larry Johnston" <ljohns@QNET.COM>,
     "Larry Johnston" <k6hlh@sbcglobal.net>,
     "Kenneth Zadwick" <kenzad01@sbcglobal.net>,
     "Kenneth Schofield" <w1ril@juno.com>,
     "Kenneth R Burtchaell" <kburt6@juno.com>,
     "kd7ts" <kd7ts@ispwest.com>,
     "John M. Franke" <j.m.franke@larc.nasa.gov>,
     "John Hazell" <hazell@dsl.pipex.com>,
     "John Ekiss" <jaekiss@worldnet.att.net>,
     "Jim Wortham" <w7gnp@cybertrails.com>,
     "Jim Hudson" <jlhudson@ev1.net>,
     "Jerry Kleker" <w7qx@sedona.net>,
     "Jack O'Mara" <W4AD@verizon.net>,
     "Grant Hodgson" <grant@ghengineering.co.uk>,
     "gcomm" <gcomm803@bellsouth.net>,
     "Gary Mohrlant" <w0ghz@arrl.net>,
     "Dr. Gerald N. Johnson, electrical engineer" <geraldj@isunet.net>,
     "Doug McGarrett" <dmcgarrett@optonline.net>,
     "Dave Glawson" <dave@usmw.com>,
     "Darrell" <ve1alq@nbnet.nb.ca>,
     "Chuck E Swedblom" <chuckswed@juno.com>,
     "Chuck and Nancy Smallhouse" <w7cs@theriver.com>,
     "Chip Angle" <chip@anglelinear.com>,
     "Charles S. Osborne" <csosborne@citcom.net>,
     "Charles Justinak" <W7GBI@earthlink.net>,
     "Burns" <bburns@ridgenet.net>,
     "Buck Calabro" <Buck.Calabro@commsoft.net>,
     "Bruce Rahn" <brahn@woh.rr.com>,
     "Baker, Donn B" <Donn.Baker@UNISYS.com>,
     <allong@infosite.com>,
     "AA6HA-John" <jaekiss@att.net>,
     "zauli lodovico" <lodzauli@tin.it>

I'm sorry. I forgot to attach the attachment. HI


----- Original Message -----
From: Jerry Kleker
To: Zack Widup ; Woody ; Wes Atchison ; wb1fkf ; Wayne Yoshida ; Warren J.
Walsh ; WA7CJO ; wa1zms@arrl.net ; w7gz@netzero.net ; Travis Thomas ; Ted-
WA8ULG ; Switzer, Emil ; Steven Kerns ; Rod Preston ; Robert Roy ; Robert
McGwier ; Rene Barbeau ; ReemeeRchrd@aol.com ; Randy Bynum, NR6CA ; Peter
Freeman ; Paul Wade W1GHZ ; nu8i ; Mike73@aol.com ; Mike Pinault ; Mark ;
Luis Cupido ; Lloyd Crawford ; Larry Johnston ; Larry Johnston ; Kenneth
Zadwick ; Kenneth Schofield ; Kenneth R Burtchaell ; kd7ts ; John M. Franke
; John Hazell ; John Ekiss ; Jim Wortham ; Jim Hudson ; Jerry Kleker ; Jack
O'Mara ; Grant Hodgson ; gcomm ; Gary Mohrlant ; Dr. Gerald N. Johnson,
electrical engineer ; Doug McGarrett ; Dave Glawson ; Darrell ; Chuck E
Swedblom ; Chuck and Nancy Smallhouse ; Chip Angle ; Charles S. Osborne ;
Charles Justinak ; Burns ; Buck Calabro ; Bruce Rahn ; Baker, Donn B ;
allong@infosite.com ; AA6HA-John ; zauli lodovico
Sent: Saturday, January 17, 2004 10:28 AM
Subject: 10 MHz VCXO PCB layout #2

Attached is the VCXO PCB layout. It is an SMD layout but
I have left enough room so that standard components can be used.

The reason that the picture is a little fuzzy is so I could keep the
file size small.

I am not setup to produce these boards in any quantity. If somebody
would like to take on the job, I can supply the information.

In my next E-mail, I'll send a photo of my setup.

73

Jerry    W7QX


                            Name: 10 MHz PCB layout.jpg
   10 MHz PCB layout.jpg    Type: JPEG Image (image/jpeg)
                        Encoding: base64