Amateur's shacks on the internet

This page takes a while to load, please, be patient.
There are over 20 pictures on this page so far, and I am always looking for more to add.!

VK6ANC - The Northern Corridor Radio Group
West Coast College, Carine, WA.
The NCRG has a cool packet radio system, powered by Linux ! =)
Want to sit for your amateur license in VK6?



SL3VZ - Contest Station
"One of the greatest contest stations in Sweden"




SK2AU Radio Club - Skellefte�, northern Sweden.
This is a great site!
Nice layout and a lot of work put into it !!



VK4GO lives in Queensland (Eastern Australia) he's situated about 14 stories up in an apartment building in, good for height !!
He's made good use of the partment too, by the looks of it ! =)
His Inverted V arrangement...

His computer set-up.

His Terlin outbacker verticle.

JX7DFA's hf station.
JX7DFA's HF Station

The shack from "the photo gallery", which there was an article written about in Radio and Communication magazine quite a while back.
The station is W2XO.

EA6ACC fiddling with the vfo at his qth
EA6ACC's gear

Alfons, 9M6MU, at his shack before he sold all the equipment.
9M6MU's shack

This is JX7DFA's vhf station.
Looks like he uses a Yaesu FT-736R, or something of that kind.
JX7DFA

K3LR visiting VE3EJ's nicely laid out shack.

Another nicely presented shack....it's K8CX's.

Here's one antenna array that you wouldn't miss.

Here's what's on the tower..... a 6 element beam on 10 metres at 200 feet,
a 4 element beam on 40 metres at 100 feet, a 3 element beam on 80 metres at 150 feet
and a 5 element beam on 20 metres at 120 feet......cop that

This one is a photo from the "qsl.net" shack of the month.
The shack of n8me, Mark.
I think that's a Kenwood, TS-870S in the middle.

The next three pictures are of the VK6RBP international beacon project in Roleystone, Perth, Western Australia.
The beacon is made up of a Kenwood TS-50S transciever, controller interface and a multiband vertical.

This is the view of the equipment mounted in a rack at the beacon site.



The fella's who digged the massive trench from the transmitter to the antenna...80m (250')
to exclude any interference to the beacon !!!!
Cliff - VK6LZ on the shovel and Rob - VK6TRC on the matic
More information about the VK6RBP project can be found here, at the home page !



JA4MBM's Antenna farm

A close look at one of MBM's antenna's

JX7DFA's beams' for VHF and UHF. A good silhouette has been produced.!

KT4JK's nice, simple, array.

Here's the same beam, viewed from the South.


VK6RBS beacon in Busselton, about 6 or 7 hours drive south of Perth.



and the antenna....



The VK6RPH beacon installation at Perth TV Channel 9's tower.



Ron, VK5RY and his shack in South Australia

vk5ry's shack

Ron's beam

Ron's main operating gear, an FT990 and a controller below it.

VK6ADF's shack before he moved QTH to Dongara, a town a coupla hundred k's North of Perth, Western Australia's capital city..
[ The photo will be up when he has finished redesigning his shack .]


Due to TAFE studies, I don't have as much time for web browsing anymore, so, there won't be too many updates for a while.
Sorry.



Enter your e-mail address to receive e-mail when this page is updated.

Your Internet e-mail address:


Comments or suggestions?
My email is [email protected]