+++++++++++++++++++
From: "Rich Lentz" <ke0zx at cox.net>
To: <ham_tech at juno.com>,
        "Elecraft Reflector" <elecraft at mailman.qth.net>
Subject: RE: [Elecraft] log and K2 control program
Date: Tue, 18 Jun 2002 18:02:23 -0500

MixW2  does all of this.  www.mixw.net

Rich

-----Original Message-----
From: elecraft-admin at mailman.qth.net
[mailto:elecraft-admin at mailman.qth.net] On Behalf Of ham_tech at juno.com
Sent: Tuesday, June 18, 2002 8:42 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] log and K2 control program

Hi,

Where can I get a program that will both control the frequency readout
input and output of my Elecraft K2, and also allow me to do digital
modes
like PSK31, and pactor; and also allow a log for putting in contacts?

Daniel

++++++++++++++++
From: "Dave" <dave at astromag.co.uk>
To: <ham_tech at juno.com>
Cc: <Elecraft at mailman.qth.net>
Subject: Re: [Elecraft] log and K2 control program
Date: Wed, 19 Jun 2002 17:50:58 +0100

>Where can I get a program that will both control the frequency readout
>input and output of my Elecraft K2, and also allow me to do digital modes
>like PSK31, and pactor; and also allow a log for putting in contacts?

Daniel

The program "Logger" works very well with a packet radio running on VHF
while inputting the DX Cluster "wanted" station frequencies into the K2.
Beware it only knows about VFO A and will cause you to scratch your head
wondering why it only changes band if you select "B". Logger is at:
http://www.qsl.net/kc4elo/

Another program to use with the K2/KIO2 is BeaconSee (to automatically
monitor propagation), from the COAA Observatory: http://www.ip.pt/coaa/ look
under "software". Bev (CT1EGC) of COAA has the settings for the K2. The
settings overcome the limitations on VFO A/B as above. Note you will need to
set your computer clock very accurately in order to use this program,
Dimension4 from http://www.thinkman.com/ will set your PC's clock from the
internet.

73's Dave, G4AON
K2 #1892, K1 #1154

+++++++++++++++++++