++++++++++++++++++
To: gjtalia at gte.net, elecraft at mailman.qth.net
Date: Tue, 4 Jun 2002 12:16:16 -0700
From: ham_tech at juno.com
Subject: [Elecraft] K2 Mode Display

Hi George,

This is the Fast Play Mode.  You'll need to go to the menus through PF1
or 2 to select it.  Then turn it off.  Finally remove the option from PF1
or 2, if so desire.

Dan




OK you K2 experts, once again I need some direction.   My K2 (2544)  has
=
been working great since I finished building it a couple months ago.   =
In fact it still works great except for the following has now happened. 
=
=20
 
When in CW mode, the lower case 'c' is now alternately changing from a =
'c' to an upper case 'F' and then back to a 'c'.  I can't find anything =
in the manuals that reference what the 'F' stands for.  Also, when I tap
=
the PRE/ATT button the LCD shows 'FPLY 4' and when I tap the AGC button =
the LCD shows 'FPLY 5'.  And of course the normal function of the =
buttons does not work (SPOT and CW RV works but not the primary =
functions).   When in SSB mode all is well and the buttons and display =
function normally.   This anomoly that is now happening does not seem to
=
affect the operation of the K2 while in CW mode since I continue to have
=
QSO's with it.
 
This weirdness happened after I changed the function of the PF2 button =
to the ATU.   I am hoping that  I just need to push some other =
combination of buttons to return the display and key functions to normal
=
instead of a hard reset of the controller.
 
Any thoughts out there?
 
Thanks,
 
George - WB8BRC

+++++++++++++++++