++++++++++++++++++++++++++++++++++++++
Date: Thu, 26 Apr 2001 20:50:07 -0400
From: "Roger E. Marrotte" <marrotte at mediaone.net>
Subject: [Elecraft] K2 BFO Test Problem

Thanks to those who sent helpful comments.  I discovered that if I had the
bottom off the K2, the BFO frequency difference was OK.  With the cover on,
N/G.  So after some very helpful and responsive emails from Gary at Elecraft
I removed L33 from the bottom of the big board, clipped all things sticking
up too high and then resoldered L33 to the bottom of the board.  Now it
works with the bottom on or off.  That L33 is really close to the cover.

73, Roger, W1EM
+++++++++++++++++++++++++++++++++++++++++