+++++++++++++++++++
Date: Mon, 28 Jan 2002 10:05:28 -0800
From: Eric Swartz WA6HHQ - Elecraft <eric at elecraft.com>
Organization: EleCraft
To: Rod N0RC <rod at n0rc.com>
Cc: Elecraft-list <elecraft at mailman.qth.net>,
        Low Power Amateur Radio Discussion <qrp-l at Lehigh.EDU>
Subject: Re: [Elecraft] K1 knob mfg?

The knobs are custom made for us by Rogan, (800)584-5662. I don't believe they
sell in small quantities.

You are welcome to buy additional K2 and K1 knobs from us. Just contact Scott (
scott at elecraft.com ) and he will quote you the prices for each.

73, Eric  WA6HHQ
========

Rod N0RC wrote:
> Might anyone know who produces the K1 knobs? (both the large and
> small)
> 
> I'm getting ready to build another NorCal 20 and thought the K1 knob
> set would look good on the NC20. Or, perhaps the "mystery supplier"
> has other offerings that would look cool.

+++++++++++++++++++
Date: 28 Jan 02 14:18:48 MST
From: Rod Cerkoney <rod at n0rc.com>
To: Eric Swartz WA6HHQ - Elecraft <eric at elecraft.com>,
        Rod N0RC <rod at n0rc.com>
Subject: Re: [Re: [Elecraft] K1 knob mfg?]
Cc: Elecraft-list <elecraft at mailman.qth.net>,
        Low Power Amateur Radio Discussion <qrp-l at Lehigh.EDU>

Thanks Eric,

Turns out Rogan's name was mentioned in the K1 manual (mia culpa didn't R=
TFM
well). After surfing Rogan's web site, I'm left with the feeling that hey=
 are
a custom/contract manufacturer & don't sell retail. But that's OK, I'll
contact Scott, as you suggest, when I'm ready. (Heck, if we can use Yeasu=

knobs on Elecraft gear, why not Elecraft knobs on a NC20! ;-)

73, Rod N0RC


Eric Swartz WA6HHQ - Elecraft <eric at elecraft.com> wrote:
> The knobs are custom made for us by Rogan, (800)584-5662. I don't belie=
ve
they
> sell in small quantities.
> =

> You are welcome to buy additional K2 and K1 knobs from us. Just contact=

Scott (
> scott at elecraft.com ) and he will quote you the prices for each.
> =

> 73, Eric  WA6HHQ

++++++++++++++++++
Date: Sun, 15 Dec 2002 07:02:39 -0800
From: Phil Wheeler <w7ox at earthlink.net>
Organization: Outstanding
To: Unifiedtx at aol.com
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Dressing Up the Back of the K2/100

Unifiedtx at aol.com wrote:

>Has anybody found some nice looking caps to cover the unused BNC connectors 
>on the back of the K2, KPA100 and the KAT100-1, replacing the black plastic 
>ones.  
>

I think Elecrat has them.  When you build certain options, there are 
unused BNC prots and I believe I received covers with one or more 
options since I do have one of more on the back of my K2.  I do not 
recall purchasing them elsewhere -- but it is possible I did (live in LA 
with lots of electronics shops around)

73, Phil

+++++++++++++++