+++++++++++++++++
From: DL2HRF at aol.com
Date: Wed, 19 Feb 2003 08:19:17 EST
Subject: RE: [Elecraft] K1 - Front panel board - orphaned resistors
To: elecraft at mailman.qth.net
Cc: mamorrow at tva.gov

>From: DL2HRF at aol.com

> I have also experienced the same with K1 #1434...
> I have 2 resistors left, even the 220Ohm and 100kOhm

Could the 100k resistor you have left over be R19?  This is a resistor =
added to recent K1s that is to be installed across the VFO potentiometer =
terminals (wiper to hot-side) in order to linearize the VFO?

Mike / KK5F =20


 
Hi Mike,
thanks for your  interest in this subject.
I doublechecked all R and C etc while building...
I also checked R19 as you mentioned,but it is ok in place.
So I think these two resistors are gifts from ELECRAFT,
maybe part of the MOJO :-)
73 de Tom, DL2HRF

++++++++++++++++