************************************************************
*                                                          *
* Band information file for LOGGER                         *
*                                                          *
************************************************************
* Edit this file very carefully !!                         *
* Please have a backup if something gets wrong.            *
************************************************************
*                                                          *
* Syntax for band information line is :                    *
*                                                          *
* <Band LOGGER text>;<Band MHz start>;<Band text>;         *
*                                                          *
* <Band LOGGER text>                                       *
* ------------------                                       *
* The name of the band as you will see it in LOGGER.       *
* MAX 4 charaters !!!                                      *
*                                                          *
* <Band MHz start>                                         *
* ----------------                                         *
* Start of band in MHz for DX cluster...                   *
*                                                          *
* <Band text>                                              *
* -----------                                              *
* A 'normal' name of the band in 'clear text'.             *
* Today used only for band information in EDI files        *
*                                                          *
* <Band code>                                              *
* -----------                                              *
* A code charater for the band. Used to create filename    *
* for the EDI files.                                       *
*                                                          *
************************************************************
*                                                          *
* DISABLE/ENABLE BAND                                      *
* -------------------                                      *
* To disable bands from selection in program set * at      *
* the begining of the line.                                *
*                                                          *
* Observe use * charater ONLY for disable unused bands     *
*                                                          *
************************************************************
*                                                          
*1.8M;1;-;-;
*3.5M;3;-;-;
*7.0M;7;-;-;
*10M;10;-;-;
*14M;14;-;-;
*18M;18;-;-;
*21M;21;-;-;
*24M;24;-;-;
*28M;28;28 MHz;9;
50M;50;50 MHz;A;
*70M;70;70 Mhz;B;
144M;144;144 MHz;C;
*220M;220;220 MHz;D;
432M;432;432 MHz;E;
*900M;900;900 MHz;F;
1.3G;1296;1.3 GHz;G;
2.3G;2320;2.3 GHz;H;
3.4G;3400;3.4 GHz;I;
5.7G;5668;5.7 GHz;J;
10G;10368;10 GHz;K;
24G;24048;24 GHz;L;
47G;47088;47 GHz;M;
76G;76000;76 GHz;N;
120G;120000;120 GHz;O;
144G;144000;144 GHz;P;
248G;248000;248 GHz;Q;
*
************************************************************
*                                                          *
* Default setup of mode/propagation selections for         *
* new template.                                            *
*                                                          *
************************************************************
*                                                          *
* Max 4 charater for each selection                        *
* and maximum of 20 selection.                             *
*                                                          *
************************************************************
*
MODE=SSB;CW;FM;AM;FSK;JT44;WSJT;PSK;PKT;????
PROP=TR;AUR;AUE;ES;MS;BS;F2;ION;FAI;TEP;EME;SAT;???
