Command summary for FlexNet Nodes (Version 3.3g)
  ------------------------------------------------

  A                       shows information about Destination calls
  B                       shows beacon text
  C <call> [options]      connect to station <call>; possible options:
                          <node>     : use path via <node>
                          <node-SSID>: use path via <node> with <SSID>
                          <port>     : use path via <port>
                          (a maximum of 6 of these options can be given)
  C -<SSID>               change to (user)port <SSID>
  C                       shows all participants of convers (with
                          channelnumber) and users of the infobox
                          (with '---'); after the prompt 'channel?' you
                          can type the channel number to enter a spe-
                          cific channel or type RETURN to go back to
                          the infobox
                          commands in the convers mode:
    /w                    shows all users of convers and infobox
    /w <n>                shows all users of convers channel <n>
    /c                    shows the current channel number of the convers
    /s <call> <text>      sends <text> to the user <call>
    /t <call>             starts talk mode to user <call>
    /t                    exits talk mode
    /q                    Quit, exits convers or talk mode
  D                       shows destination table (list of reachable
                          nodes) with SSID range and RTT in tenth of
                          a second
  D <partial call>        like D, shows only destinations with the
                          string <partial call> e.g. prefix or suffix
  D *                     like D, shows also destinations that would
                          be available  via a loop
  D * <partial call>      combination of 'D *' and 'D <partial call>'
  D <call>                shows RTT and choosen path to <call>
  D <call> *              shows RTT via different available paths
  D <call> >              shows RTT of all nodes of the path in between
  F <call>                search for <call>
  H                       shows this help text
  I                       shows information about the node
                          (if available)
  L                       shows link information of the node
  L *                     like L, additionally shows the last 16
                          measured RTT's
  LO                      shows local info text
  M                       connects to the (local) mailbox (if defined)
  M ?                     shows call of the (local) mailbox (if defined)
  MH <options>            shows MHeard list: list of stations with
                          time since the last activity;
                          possible options:
                          <call>        :  callsign
                          <partial call>:  shows only stations with
                                           the string <partial call>
                                           e.g. prefix or suffix
                          <number>      :  shows last 16..300 entries;
                                           default: 30 entries
  MY                      shows callsign of the node with SSID range
  P                       shows parameters (layer 1/2 parameters)
  P *                     like P, with additional information
                          (see below)
  P [*] <port>            like P or 'P *' only for port <port>
  Q                       disconnect from the node
  S                       shows searchpaths for the FIND command
                          (setsearch text)
  ST                      shows internal port statistics
  T <call> <text>         talk mode, sends <text> to user <call>
  T * <text>              sends <text> to all users connected to
                          the infobox
  T <call>                starts talk mode to user <call>, the talk mode
                          uses the same command set like the convers
                          mode
  U <options>             shows user list; possible options:
                          '*'    : also shows Maxframe and Frack
                          '='    : shows only the QSO's directly
                                   with the node (infobox)
                          <port> : shows only QSO's on port <port>
                          <call> : shows only user <call>

  Additional information when using the commands 'L *' and 'P *' :

       (d:142 v:1 t:193d,14h)
        |     |   +---------- time since last start/reset (uptime)
        |     +-------------- software revision (minor updates)
        +-------------------- number of destinations stored in the
                              routing list; these destination are
                              reachable via FlexNet routing