; Basic configuration LOCATOR=FN22hm ; Node locator NODECALL=KP3FT-2; Node callsign NODEALIAS=SNBNOD; Node alias (6 characters max) EnableM0LTEMap=1 ;PASSWORD=salmos23 LINMAIL ; Enable BBS ;LINCHAT ; Enable CHAT IDMSG: ; UI broadcast text from NODECALL to fixed dest ID KP3FT-2 Packet Node/BBS/Chat/Winlink, South New Berlin, NY *** ; CTEXT: KP3FT-2 BPQ node, part of the PRDOGS Packet Network in Puerto Rico. Also RF-linked to local EastNet Flexnet packet network via CHENGO:KP3FT-1 (X)Net node, and N3MEL-7 in Pennsylvania via VARA HF. Enter a command: [N]odes [C]onnect [BBS] [CHAT] [RMS] [I]nfo [B]ye [?] *** FULL_CTEXT=1 ; 0=send CTEXT to L2 connects to NODEALIAS only ; 1=send CTEXT to all connectees ; Network System Parameters: OBSINIT=6 ; Initial obsolescence set when a node is included ; in a received nodes broadcast. This value is then ; decremented by 1 every NODESINTERVAL. OBSMIN=4 ; When the obsolescence of a node falls below this ; value that node’s information is not included in ; a subsequent nodes broadcast. NODESINTERVAL=20 ; Nodes broadcast interval in minutes IDINTERVAL=30 ;UI broadcast interval in minutes, 0=OFF BTINTERVAL=30 ; The BTEXT broadcast interval in minutes, 0=OFF L3TIMETOLIVE=25 ; Max L3 hops L4RETRIES=3 ; Level 4 retry count L4TIMEOUT=60 ; Level 4 timeout in seconds s/b > FRACK x RETRIES L4DELAY=10 ; Level 4 delayed ack timer in seconds L4WINDOW=4 ; Level 4 window size MAXLINKS=63 ; Max level 2 links MAXNODES=512 ; Max nodes in nodes table MAXROUTES=64 ; Max adjacent nodes MAXCIRCUITS=128 ; Max L4 circuits MINQUAL=168 ; Minimum quality to add to nodes table ; INP3 Routing is experimental. The two parms which ; follow will be ignored unless activated in the ; ROUTES: section. MAXHOPS=4 ; INP3 hop limit to add to tables MAXRTT=90 ; INP3 max RTT in seconds BUFFERS=255 ; Packet buffers – 255 means allocate as many as ; possible, normally about 130, depending upon other ; table sizes. ; TNC default parameters: PACLEN=128 ; Max packet size (236 max for net/rom) ; 236 is suitable for reliable and fast connections, such ; as AX/IP/UDP or a dedicated 9600 RF Link ; 120 is suitable for a shared VHF packet radio connection ; PACLEN is defined for each port in the ports sections TRANSDELAY=1 ; Transparent node send delay in seconds ; Level 2 Parameters: ; T1 (FRACK), T2 (RESPTIME) and N2 (RETRIES) are now in the PORTS section T3=1200 ; Link validation timer in seconds IDLETIME=720 ; Idle link shutdown timer in seconds ; Configuration Options: AUTOSAVE=1 ; Saves BPQNODES.dat upon program exit BBS=1 ; 1 = BBS support included, 0 = No BBS support NODE=1 ; Include switch support HIDENODES=0 ; If set to 1, nodes beginning with a # ; require a ‘N *’ command to be displayed. /* The *** LINKED command is intended for use by gateway software, and concern has been expressed that it could be misused. It is recommended that it be disabled (=N) if unneeded. */ ENABLE_LINKED=A ; Controls processing of *** LINKED command ; Y = allows unrestricted use ; A = allows use by application program ; N = disabled ;RF-only Node linked to FRNPA (First Responders Network of PA, N3MEL) in Eastern PA. INFOMSG: Location: South New Berlin, NY, FN22hm Bands: HF 3.596 and 7.082 dial freqs, USB mode VHF 145.530 KP3FT-1 (X)Net Node, linked to AA2YG-1 (X)Net Node UHF 445.030 Backbone to W2RGI-2 Modes: VHF/UHF AX.25 packet, VARA-HF Power: 50w VHF/UHF, 50w HF Antennas: TRAM 1481 omni, HF 80 horizontal loop at 32' RF Links: N3MEL-7 BPQ Node, N3MEL-2 BBS (First Responders Network of PA) W2RGI-2 Flexnet Node (Eastnet Packet Network) AA2YG-1 (X)Net Node (Eastnet Packet Network) *** ; ; Add Radio Port(s) Here PORT PORTNUM=1 ; Port number ID=300bd AX25 ; PORTS command text DRIVER=KISSHF INTERLOCK=1 CONFIG ADDR 127.0.0.1 8111 CHANNEL=A ; TNC channel MAXFRAME=1 ; Max outstanding frames FRACK=5000 ; Level 2 timeout (ms) RESPTIME=3000 ; Level 2 delayed ACK (ms) RETRIES=5 ; Level 2 max retries PACLEN=60 ; Max packet length (bytes) TXDELAY=120 ; Transmit keyup delay (ms) SLOTTIME=120 ; CMSA interval timer (ms) PERSIST=63 ; Persistence (256/(# transmissions-1) ENDPORT ; PORT PORTNUM=2 ID=VARA-HF KISS (APRS) DRIVER=KISSHF INTERLOCK=1 CONFIG ADDR 127.0.0.1 8107 BW500 ENDPORT ; PORT PORTNUM=3 ID=VARA-HF 40m/80m DRIVER=VARA INTERLOCK=1 CONFIG ADDR 127.0.0.1 8300 PTT CI-V SESSIONTIMELIMIT 15 BW500 MYCALLS KP3FT-2 KP3FT-3 KP3FT-4 KP3FT-6 KP3FT-10 RIGCONTROL /dev/ttyUSB0 19200 ICOM IC756PRO 5C 5,3.596,USB 14:00 5,7.1032,USB 22:00 5,3.596,USB **** WL2KREPORT PUBLIC, cms.winlink.org, 8085, KP3FT-10, FN22HM, 22-14, 3597500, VARA500, 30 WL2KREPORT PUBLIC, cms.winlink.org, 8085, KP3FT-10, FN22HM, 14-22, 7104700, VARA500, 30 ENDPORT ; PORT PORTNUM=4 ; Port number ID=IL2P 300bd AX25 ; PORTS command text DRIVER=KISSHF INTERLOCK=1 CONFIG ADDR 127.0.0.1 8113 CHANNEL=A ; TNC channel MAXFRAME=1 ; Max outstanding frames FRACK=5000 ; Level 2 timeout (ms) RESPTIME=3000 ; Level 2 delayed ACK (ms) RETRIES=15 ; Level 2 max retries PACLEN=60 ; Max packet length (bytes) TXDELAY=350 ; Transmit keyup delay (ms) SLOTTIME=120 ; CMSA interval timer (ms) PERSIST=63 ; Persistence (256/(# transmissions-1) ENDPORT ; PORT PORTNUM=5 ID=Telnet Server DRIVER=TELNET/CMS CONFIG RELAYHOST=127.0.0.1 LOGGING=1 CMS=1 CMSCALL=KP3FT CMSPASS=SALMOS23 HTTPPORT=8888 ; Port used for Web Management TCPPORT=8777 ; Port for Telnet Access FBBPORT=8999 ; Not required, but allows monitoring using BPQTermTCP CMDPORT=8777 63010 MAXSESSIONS=10 FALLBACKTORELAY=1 RELAYHOST=127.0.0.1 RELAYAPPL=BBS CloseOnDisconnect=1 ; Close Telent Session when Node disconnects USER=kp3ft,salmos23,KP3FT,NODE,SYSOP USER=np4jn,salmos23,NP4JN,NODE,SYSOP ENDPORT ; PORT PORTNUM=6 ; Optional ID=AXIP and XNet TYPE=EXTERNAL DRIVER=BPQAXIP QUALITY=200 MINQUAL=0 FRACK=7000 RESPTIME=1000 RETRIES=10 MAXFRAME=7 CONFIG MHEARD ON UDP 10093 BROADCAST NODES MAP KP3FT-1 127.0.0.1 UDP 10094 B MAP KP4PRA-10 kp4dog.com UDP 10093 B ENDPORT ; APRSDIGI APRSCall=KP3FT-3 StatusMsg=https://tprfn.net Symbol=B ; Icon, a Black Diamond, to display for station. Symset=/ ; This is a "I" in a Black Diamond. APRSPath 1=TPRFN,WIDE1-1 ;Dest and up to 8 digis BeaconInterval=45 ;Send Beacon every 29 minute. Minimum is 5 mins MAXAGE=2400 ;In minutes, after which the APRSCall is 'old' Digimap 2=2 MaxTraceHops=2 ; Max value of n in CALLN-n processing. If a packet is received MaxFloodHops=2 ; this, the value will be replaced BEFORE it is decremented. LAT=4232.03N LON=07520.32W ISHost=noam.aprs2.net ; APRS-IS Host Name. May be either an IPV4 or an IPV6 Host ISPort=14580 ; Normal port for a filtered feed ISPasscode=24564 ; If you don't already have a passcode G8BPQ can issue you one. ISFilter=m/0 ; Filter Command if needed **** ; ROUTES: ; Locked routes (31 maximum) N3MEL-2,192,4 N3MEL-7,192,4 KP3FT-1,1,6,0,0,0,1 *** APPLICATION 1,RMS,C 5 CMS,KP3FT-10,SNBRMS,255 APPLICATION 2,BBS,,KP3FT-4,SNBBBS,255 APPLICATION 4,MELBBS,ATTACH 4 N3MEL-2,N3MEL-2,MELBBS,0 APPLICATION 5,MELNOD,ATTACH 4 N3MEL-7,N3MEL-7,MELNOD,255 APPLICATION 6,WX,C 5 HOST 1 S NOCALL APPLICATION 9,SNBXNT,C 6 KP3FT-1,KP3FT-1,SNBXNT,255