Version history for the latest Dishal program revisions
=======================================================

In version 2.0.3: (keine Bugfixes)
----------------------------------

1)  Ein neues Programm wurde der Menleiste hinzugefgt: "QER(G3UUR)".
    Es erlaubt die exakte Berechnung des "Quasi-Equiripple" - Filters,
    das constant-k (Cohn) Filter mit sehr niedriger Welligkeit erlaubt.
    Es ist im ARRL-Handbook 2010, Seiten 11.32-11.33 beschrieben.

2)  Das Programm fr die G3UUR Oszillatormethode wurde gendert. Es
    enthlt nun versbesserte Algorithmen fr eine hhere Genauigkeit.
    Die Serienfrequenz fs wird jetzt auch berechnet und angezeigt.

3)  Die 'maximum bandwidth' - Info wird jetzt auch direkt unterhalb des
    Eingabefeldes fr die Bandbreite angezeigt. 

4)  Die Hilfe-Datei ist jetzt wahlweise in deutsch oder englisch aufruf-
    bar. Dafr mssen beide PDF-Dateien "dDishalHelp" und "eDishalHelp"
    im Programmordner liegen.

    Die Hilfedateien wurden entsprechend der nderungen aktualisiert.


In version 2026:
------------------------

1)  Recalculation by hitting the <RETURN> key has been extended   
    to all relevant subprograms

2)  Fix: Freqency Offset information was not updated in LIN mode
    when the selected Freq Span was smaller than Bw3db.

3)  Fix: The status of the "Lm/Cm" selection was not saved in
    the config file.



In version 2025 (3 enhancements/fixes):
-----------------------------------------------

1)  A recalculation can now also be triggered by pressing
    the <RETURN> key, besides the "Calculate" button

2)  If the value of the filter impedance exceeds 3000 Ohm,
    or if any of the coupling capacitances is below 10pF,
    these numbers will be shown in red colour.

    (I became tired of my own creation of a warning
     message in v2024 which always appeared for the above
     condition, even when I only changed the freq range
     of the display)

3)  A new subprogram has been added to the Menu bar: "Cs2Cp".
    It allows the transformation of the series (Cs1) termination 
    capacitance into its parallel equivalent

The Help has been updated accordingly


