Here are the codes for all of the repeater goodies, please make sure to identify before executing these codes
0 (zero) |
LiTZ (Long Tone Zero) Emergency Call (hold for 3 seconds) |
A1 |
Gives the time and date |
A2 |
Gives the current LID |
A3 |
Replays the initial repeater ID |
A4 |
Gives the current outside temperature |
A5 |
Gives the high and low temperature for the day |
A6 |
Tells you what 6 meter channel is on |
AB |
DVR audio test |
B1 |
Sets the repeater tail short for crossbanding |
B2 |
Sets the repeater tail to normal |
B4 |
Disables PL tone for 15 minutes |
B5 |
Enables PL Tone access |
B7 |
Turns 6 meter transmit off |
B8 |
Turns 6 meter transmit on |
CB1 |
Brings the 6 meter link up |
CB2 |
Brings the 6 meter link down |
CB3 |
Brings the 6 meter link up in monitor mode only |
CC1 |
Changes the 6 Meter frequency to the 53.37 repeater |
CC2 |
Changes the 6 Meter frequency to 52.540 simplex |
CC3 |
Changes the
6 Meter frequency to 52.525 national |
For a downloadable, printable and cutable business card for your wallet with all the repeater codes in Adobe Reader PDF format, Click Here