If you have GM1200 radio with "RADIO FAULT 02" message, don't worry, now it is possible to bring it back to life. 
For this situation you need the GM/GP1200 DPS Programmer, "MTSX LAB" RSS and "Hex Workshop".
First, open with "Hex Workshop" file "Mrhn8cn.rad" (or other for your model) from DPS12DW dir
 and delete selected block like in this screen:

Next, in "Hex Workshop" - export file like "motorola s19" to  "test.s19".
Reboot your PC (if you have win9x) to DOS (no emulation!) and with :
1st method read/write EEPROM "MTSXLAB" or "ASTROLAB" open F3/F6 - Srecords - F4 and F4 
- Read/Write Radio with No Pack/Unpack write to radio with F8. or
2nd method read/write EEPROM with "CPR.EXE" from  wookie mobius lab 
Usage: CPR [r{X}|w{X}] file where X is the com number (default: 1)

After this radio reboot and prompt "no personality" !
Last step - program with DPS yours files in normal mode.
Now - Serial number is "1234567890" :)

---

Edit and correct check sum in EEPROM DUMP

Remember save old value of EEPROM !!!
1st method

1. calculate "checksum-8" for selected block and find "CONST"
2. 0x53-0x33 = 0x20 = CONST
 ! After edit, if "checksum-8" = 0x6E,
   new value on adress (0x4A)="checksum-8" + CONST 0x6E + 0x20 = 0x8E

2nd method

run cpfixcrc.exe eeprom.s19 :)
cpfixcrc.exe from  wookie mobius lab 


Good Luck !