TH-D7AG

 

                                      

Kenwood goes beyond the limits of what today's Amateurs expect from a radio. The TH-D7AG is equipped with a built-in AX.25 TNC for simple packet operation or to be used with a handheld GPS (NMEA-0813 compatible) as a full function APRS(TM) Automatic Packet/Position Reporting System. The TH-D7AG is capable of reporting exact position, speed and heading as well as calculation of distance to destination.

The TH-D7AG can also be used for APRS(TM) messaging to send up to 45 character messages through APRS(TM) or APRS(TM) Internet gateways without the use of a PC. Additional features such as advanced functions and capabilities with the VC-H1 Visual Communicator and HF SkyCommand operation with the Kenwood TS-570 D/S or TS-870S series radios are possible. The new unique jog/cursor key makes navigation through the TH-D7AG features a breeze. The TH-D7AG now makes DATA communications simple and easy.

To learn more about APRS, visit these sites:





  
  • Brochure
  • Operator Manual
  • See the Accessories
  • 144/430 MHz operation
  • 5.5 WATTS @ 13.6 Volts
  • Built-in 1200/9600 baud TNC
  • Built-in APRS(TM) operating software
  • Dual RX on the same band for voice and data (VHF only)
  • Large 12 digit x 3 line dot matrix display
  • 200 memory channels w/ 8 character display
  • PC Programmable for frequency and name (PG-4W required)
  • 16 backlit keys (laser cut from inside)
  • Built-in CTCSS encode and decode
  • MIL-SPEC 810C/D/E water resistant
  • 10 channel DTMF telephone auto-patch memory
  • HF SkyCommand operation (requires PG-4R)
  • Monitor DX Clusters
  • TM-V7A and TM-742AD DTMF Remote Control
  • VC-H1 Visual Communicator advanced control operation
  • Uses the same accessories as the TH-G71A
  • SkyCommand Manual
  • See the "G" Difference
  • "G" Upgrade Brochure
    •