oscilloscoop-I
( scope.exe by Marcel Veldhuijzen ) betreft een interessante en
leuke toepassing voor op je PC. Het is een zeer mooi gemaakte compacte
oscilloscoop die ook gedurig op de achtergrond kan meelopen en processen
monitoren. Ondanks het feit dat dit een 8 bits type betreft werkt
het al heel aardig. Op het Internet vindt je uiteraard ook 16 bits
uitvoeringen en hoger maar je betaalt er vaak flink voor. Met deze
scoop kun je al heel wat ervaring opdoen of er toepassingen voor
vinden. Signalen worden via de geluidskaart gemeten. A helpfile
has been included. Voor het geval dat je problemen zou hebben met
het ontzippen kun je deze file ook met .exe extensie downloaden.
Het werkt dan meteen. Een helpfile en de cfg file zijn in dit geval
apart
te verkrijgen. Voor aanvraag : [email protected]
Uiteraard is het gratis, het betreft freeware. In dit geval is het
voordelig om de scoop op je PC te zetten vanwege de snelle installatie,
je hoeft niets te doen en ook niet te registreren. Verder heeft
een OnLine toepassing het nadeel dat de signalen vanaf je geluidskaart
eerst het internet op moeten met alle mogelijke nadelen daaraan
verbonden ..... waarbij ook vaak het volgen van je verrichtingen
.....
The
BIP Oscilloscope is a member of the BIP Labs 3.0 series which includes
a spectrum analyzer, a frequency counter, a function generator,
a noise generator and more to come. All BIP Electronics Lab software
make use of standard PC hardware (already in the PC) and are free
of charge available through the Internet.
The
BIP Oscilloscope uses the sound card's input to measure signals.
This means that the quality of the scope depends on the quality
of your sound card. The scope has the following properties
Sampling
frequency the scope automatically uses the highest sample
frequency available at the input that you select (usually maximal
44 kHz but people with 11 kHz max. also use the scope without any
problems). According to somebody named Nyquist you can only accurately
measure signals that have at most a frequency of half the sampling
frequency.
Input
impedance the same as the input impedance of your sound
card. Some users of the oscilloscope use a 470 kilo ohm resistor
that they place in cascade with the input to get a higher input
impedance. Others fool around with combinates of potmeters and capacitors.
Feel free to experiment a bit !
Accuracy
the scope uses 8-bit samples to read the input signal. It does not
make sense to compare the scope with commercially available products
with better specs. BIP Labs Software is meant for the amateur that
wants to experiment a little with an oscilloscope before buying
a real one.
BIP
Electronics Labs 3.0 - Oscilloscope
=======================================
BIP
FreeWare Fun - Wellerlooi, The Netherlands.
Release
date: April 20, 1997.
Author: Marcel Veldhuijzen.
Please
contact [email protected] when you :
*
Have found a bug, no matter how little.
* Wish more functionality added.
* Have any ideas for future BIP FreeWare projects.
Thank
you !
Marcel Veldhuijzen,
BIP member.