Subject: NET NOTES September 10 2000
From:     K1RQG 
         

     Most recent Schedules from Klaus, DL4EBY 

    Also submit your sked requests to Klaus:

     KLaus, DL4EBY 


NET BEGINS

******** I never received any sked requests for the month of September ********
prior to the request from K2UYH. Again, I apologize to the net and the EME ops
for not being here full time. Please understand that I am trying to construct
my 32' dish and for the past 3 weeks, Willie (W1ZX) has been here driving the
project. We have 33% of the dish screened, but a lot more work lies ahead. Need
to do the tower work, counter-balance, controls, feeds etc. I make no prediction
as to when the project will complete, but am devoting all my time to it. I do
believe it is time for all of you to start sending any sked requests to me. I
will try to pick up the fine job that Klaus has been doing. Klaus will still
assist in the skeds untill we get rolling. Comments are welcome.

73 de Joe K1RQG

Joe, 

If I don't get on tommorrow morning,  I worked KA0Y and he is a new one
for me.  Lot of noise here in Ak.  Doppler shift was about 1.1kHz here.
Hopefully will be on tomorrow both net and via moon.

Roger  KL7HFQ

Subj:    new # 70cm EME ( from RW1AW )
Date:   9/3/00 11:07:52 AM Eastern Daylight Time
From:   [email protected] (Alex Boreysha)
To:     [email protected]

Hi Joe !
My new # ( 70cm EME ) in August 2000 is :
G4YTL #81, W2WD #82 , DJ3FI #83 , KA0Y #84 , DL4KG #85
also very good QSO with OZ4MM,HB9SV,
VE1ALQ , PA3CSG and UA3PTW
vy 73 de Alex RW1AW 


Subj:    RE: NET NOTES SEP 2, 2000
Date:   9/4/00 4:26:16 AM Eastern Daylight Time
From:   [email protected] (David Robinson)
To:     [email protected] ('[email protected]')

K9BCT/M: doing more checks on the 23cm to 28mhz rcv converter.. no
noticeable 
    problems .. seems to outperform the 23cm to 144mhz to 28mhz.. looking 
    for more info on xverters/converters from 23cm direct to 28mhz.. still 
    looking for GR-1236..   did SSB Electronics ever make one ?? 

to k9bct

as far as i know ssb electronics never made a 1296/28 xverter as the
filtering requirements for the image reject filter were too tight for a pcb
design. I have heard of people having partial success with 1296/28
converters based on the w2cqh "3D" interdigital design

to k1rqg

WW2R is now in Uk as g4fre until at least xmas, so there will be no activity
from ww2r on arrl eme contest, however there is a possibility of G4FRE
activity from IO91, depends on my ability to get the eht psu over to UK as
well as the 20W 10G ssb syste; my apartment is at the end of the Heathrow
runway so I have a good opportunity to do some experiments on aircraft
scatter


dave

g4fre

Subj:    Sked
Date:   9/9/00 12:33:29 PM Eastern Daylight Time
From:   [email protected] (Al Katz)
Reply-to:       [email protected]
To:     [email protected] ([email protected])
CC:     [email protected], [email protected] ([email protected])

Hi Joe,

Could you add a 70 cm sked with DL4KG for me to the sked list.

73, Al - K2UYH

Subj:    FOR NET NOTES SEP 9, 2000
Date:   9/9/00 4:32:32 AM Eastern Daylight Time
From:   [email protected] (Melum)
To:     [email protected]

Hi Joe,

Hope to try to check in this weekend.  Worked KAØY 559/529 for initial #57
on 8/27 and JA6AHB 539/339, despite the close proximity of the sun.  Dish
progress: I have assembled the dish all except for a few panels for crane
access.  The tower is finished.  The tower top with bearing plate was
lifted up by forklift at 10:30 PM (in the dark) this past Thursday.  I am
now hoping to do the crane no later than next friday.

Tnx & 73

Mike, AL7OB  BP51dc  http://www.customcpu.com/al7ob

432 EME - FT-736; FT-767; 16 X 12 NBS2.2; DEM 0.4dB; 700 WATTS

Subj:    9H1ES
Date:   9/9/00 2:20:00 PM Eastern Daylight Time
From:   [email protected] (Fortunato Bonnici)
To:     [email protected]

Hello Joe, How are you?? sorry of long time on the net but it is worthed. I 
have the full size long feedhorn ready and the homemade coaxial relays are 
almost ready.  the thing is that I have inproved at the feed system. on this 
system I am working abt. five hours a week. so not much time. I let you know 
for test. best 73's 9h1es fortunato.

K5JL:   working on 6 meters currently .. nothing new.. 

WA4NJP: will be on 222 later .. on 6 now.. 

K0YW:   also working on 6 meters.. but getting ready for the crane on Tuesday..
        has an AIL 75 nf meter that does not work correctly .. 

KA0RYT: working on 70cm .. to work 6 meter scatter ... look to the EME gang for
        serious ops.. Ron suggest to K0YW to check all the AIL p/s .. electrolics
        are a known problem.. 

W2UHI:  was also on 6 meters this morning.. all set for EME .. anyone needs
        Frank.. holler.. 

KD4LT:  not much going on.. all EME running.. good echoes .. will be on tonight.

VE1ALQ: nothing much new .. QRU..

N2IQU:  ?? 

OZ9AAR: been a long time.. status on dish .. 8 meter dish in progress.. hopes
        to be on by spring.. 

DK3WG:  needs sked .. looking for W6TE, W7EME, N3FA.. 

DF3RU:  will be QRV on 23cm and 70cm next sked weekend.. not QRV on 13cm yet.
        looking for HA5SHF on 23cm..

RW1AW:  see e-mail above .. will be QRV next sked weekend on 70cm.. 

SM5KD:  .. 5/9

AL7OB:  More pictures will be on web site.. hopes to be on the dish by
        Sep weekend .. 

VE6TA:  Looking for WA4NJP for 222.010 .. 

W5LUA:  cooling down to mid 90s.. working on 24ghz stuff.. 2.4db system 
        noise figure..

VE7BQH: 12:12 PM 9/10/00

NET ENDS