TM4IPA - Working Frequencies and Modes

We will operate on the below mentioned modes and frequencies. The frequencies are a guide, look at the dxcluster.


TM4IPA - Phone
BAND
SSB
160m
1850 MHz
80m
3750 MHz
40m
7100 MHz
20m
14250 MHz
17m
18140 MHz
15m
21250 MHz
12m
24950 MHz
10m
28480 MHz
6m
50125-50200 MHz

TM4IPA - RTTY - PSK31-63-125
BAND
RTTY
PSK31 - 63 - 125
160m
1845 MHz
1838 MHz
80m
3750 MHz
3580 MHz
40m
7035 MHz
7040 MHz
30m
10140 MHz
10138 - 10142 MHz
20m
14085 MHz
14070 MHz
17m
18109 MHz
18100 MHz
15m
21085 MHz
21070 MHz
12m
24940 MHz
24920 MHz
10m
28080 MHz
28120 MHz
6m
?
?

TM4IPA - FT8
BAND
FT8
160m
1.840 MHz
80m
3.573 MHz
40m
7.074 MHz
30m
10.136 MHz
20m
14.074 MHz
17m
18.100 MHz
15m
21.074 MHz
12m
24.915 MHz
10m
28.074 MHz
6m
50,313 MHz

These are our FT8 TRANSMIT frequencies.  We will operate in the normal fashion common on FT8.  

We dont working in the Fox / Hunting mode

Be certain your TX and RX frequencies are not locked together  Click FT8 Info  to view ZL2IFB’s Tips for FT8 DXers.

We only working with WSJT-X version 2.0 !

We may adjust our transmit or receive frequencies, depending on conditions or interference.

 

We wil not work split but if necessary 5 to 10 Kc UP

We will nearly always work split frequency and will regularly annouce the frequencies on wich we are listening.

We will only make contacts on the normal transmitting frequency on FT8 no fox and hunting.

Listen to the operator carefully Each has been briefed to give the TM4IPA callsign at least after every five QSO's and to announce the listening frequencies every ten QSO's.

We will not work by numbers untill it is necessary, we feel that with good ears and equipment this is quite unnecessary.

Special note for RTTY and PSK operators : Please limit your QSO exchange to raport and callsign ONLY ! We will be trying to work as many as possible, and do not need details of your name and QTH !

Keep the QSO short ! so we work everyone of you.