proxcfg - Configure paraameters at run time for Proxim's
RangeLAN2 and Symphony drivers.
SYNOPSIS
proxcfg [dev ifname] info
proxcfg
[dev ifname] roam
proxcfg
[dev ifname] secid <security ID>
proxcfg
[dev ifname] [sta|alt|msta] [domain domain] [chan-
nel channel] [sub subchannel] [name <master name>]
[roamconfig slow|norm|fast] [MAC vlite|lite|norm]
[debug on|off]
DESCRIPTION
Proxcfg is used to configure MAC parameters in rlmod.o.
This man page is distributed with the RangeLAN2 and Sym-
phony driver library.
Dev is optional. It defaults to eth0. Don't combine
info, roam, or secid with any other parameters.
dev ifname
Configure RangeLAN2 or Symphony device with inter-
face ifname
info Prints some info about the driver to the system
log.
roam Not currently implemented.
secid <security ID>
Set the security ID into the card. This only needs
to be run when changing the security ID. The value
is saved in the card's firmware.
sta, alt, msta
Configure the radio as a station, alternate master
or master respectively.
domain domain
Set the domain of the wireless network. Symphony
uses domain 0 by default.
channel channel
Set the channel of the master. Stations don't use
this parameter. Be sure that adjacent masters
don't use the same channel
subchannel subchannel
Set the subchannel of the master. Stations don't
Set the master name of the master. Stations don't
use this parameter.
roamconfig slow, norm, fast
Configure the roam setting. Masters don't use this
parameter.
MAC vlite, lite, norm
Optimize the MAC layer of the master. Stations
don't use this parameter.
debug on, off
Turn debugging on or off in the driver. Activates
RL2DEBUG functions.
SEE ALSO
isapnp(1), modprobe(1).
Proxim's web site for the manuals and further documenta-
tion on radio parameters: http://www.proxim.com
Man(1) output converted with
man2html