From: steuer@clam.rutgers.edu (robert Steuer) Newsgroups: rec.radio.amateur.misc Subject: UPDATE: MOD for 800MHz RX on DJ-560! Message-ID: <Feb.16.15.01.03.1993.26776@clam.rutgers.edu> Date: 16 Feb 93 20:01:03 GMT Organization: Rutgers Univ., New Brunswick, N.J. Lines: 28 Here is the mod for the DJ-560. I haven't had my friend try it yet, but thanks anyway to Kevin Jessup for supplying the information!! There is NO mod required to do crossband repeat. It is a standard feature. If crossband repeat operates on the 800 MHz band (after the modification), that is another matter! Performing the aircraft mod (as described in the back of the owners manual, also gets you 800 Mhz). BTW, cutting the RED jumper provides AIRCRAFT and 800 MHz. Cutting the BLUE wire provides out of band transmit (but NO guarantess that performance will be within amateur band specs). To enable 800 MHz, press the UHF key 3 times (to guarantee that your are in UHF VFO mode). Then press the function key (keep it held down) and then press UHF. Have fun! -- Kevin Jessup, kevin.jessup@mixcom.mixcom.com "Friends don't let friends run DOS." -- Microware Thanks Again Kevin! Rob KF2EK