4.0.1 SOFTWARE METHODOLOGY
If the operators changes the front panel settings and depresses the
COMMIT button the new array will over-write the waiting array so that
only the most current setting that has been COMMITTED too will be
acted upon. When the RUN button is pressed, the program begins an
unending loop and the RUN button toggles into a STOP button. The unit
will continue to breathe at the requested settings until the STOP button is
depress at which time the unit will halt after completing the current
breathing cycle and the STOP button will toggle back to the RUN button
button is pressed. The RUN/STOP button is autonomous and will run
whatever configuration is currently in memory.