From: steuer@clam.rutgers.edu (robert Steuer) Newsgroups: alt.radio.scanner Subject: PRO-2026 MODS!!! Date: 20 Oct 92 14:55:50 GMT Organization: Rutgers Univ., New Brunswick, N.J. Lines: 29 Hi all, just got these mods, hot off the FAX! Note: It is not lawful to monitor cellular or conventional mobile telephone conversations. The 2026 has cellular frequencies deleted at the factory, but restoration is the easiest ever! - clip one marked wire! All you need is a Philips screwdriver and wire cutters. 1. Turn the scanner upside-down and remove the four side screws holding the bottom cover in place; pull the cover loose and set it back about two inches out of the way. 2. Locate the small circuit board at the lower right-hand corner and find jumper L201. Cut it and slightly separate the break. 3. Reassemble the radio which now has continuous 806-956 MHz coverage and 30KHz search increments in the cellular band. *** I have not tried the above mod, but did acquire it from a commercial radio dealer who is very respectable, so as always, proceed at your own risk and realize that this will violate your warranty! Have Fun! Rob KF2EK ------------------------------------------------------------------------------- | Robert Steuer Internet: steuer@clam.rutgers.edu | | Rutgers University Amateur Radio: KF2EK@N3FOA.#EPA.PA.USA.NA | -------------------------------------------------------------------------------