Subject: Mods for the Alinco DR-610T From: Steve Fuller Date: 5/3/96 3:09 PM I was told about about this mod for the Alinco DR-610T. You may want to include it in your list of mods. I haven't had time to modify my rig yet, so I can't vouch for the mod since I have not tried it yet. But here it is.. .... I'm told that the mod opens up the transmit capability. It sounds pretty simple. Please head the usual warnings and disclaimers about transmitting outside the HAM band and possible damage to your rig. 1.) Remove control head from front of the rig. 2.) Disconnect the cable that connects to the back of the control head. 3.) Four screws hold on the back cover of the control head. Remove them and the back cover. 4.) Clip the red and blue wires inside the control head. Then, put the rig back together. 5.) Hold the Function key down on power-up to reset the rig. 6.) You will loose the contents of the rigs memories when you perform this mod, so be prepared to reprogram them. '73's, Steve Fuller KB5FIP (rswb30@email.sps.mot.com)