

	From PICture to waterFALL : PICFALL  (by PY4ZBZ)

        DIGTRX 1.14   26-SEP-2003   			
					     (veja abaixo em portugus)




	Introduction.  
  
  
 This part of DIGTRX allows to transform a monochrome image in a audio file,
whose sound spectral content, visualized in a waterfall, results in the
original image.  
  
 I believe that this is the first program for radio amateurs to have this  
mode. It is not a new transmission mode, because it is an evolution of
C/MT Hellschreiber (for texts with two signal levels), to a system capable
to transmit gray-scale monochrome pictures.  
  
 I just created this system for experimenting, that is one of the  
main attributions of the radio amateur, or as a technical curiosity.  
  
 Of course they are limitations in the definition of the image, that should
not contain too much details, but the transmission is relatively fast,
compared to monochrome equivalent modes in SSTV.  
  
  
  
	Use.  
  
  
 1 - Click in " Open picture ", to choose an appropriate picture. It will be
converted to monochrome in the format of 130 x 200 max pixels, maintaining the
correct aspect ratio.  
  
 2 - The program adjusts contrast and brihgtness automatically, but it allows
a fine manual adjustment. The " contrast " and " brightness " trackbars
labels must be green. The image is shown approximately as it will appear in
the waterfall, and a histogram of the video signal is also shown.  
  
 3 - If the image is vell adjusted, click " Create ". A audio file will be
created, calculated from the image pixels. This file will be saved  
automatically in the " precoded " folder, with the same name of the original
picture, but with extension " .wfp ", and ready for transmission at any moment.  
  
 4 - To transmit a precoded waterfall picture, click in " Files, Quick load 
precoded waterfall picture ", and choose the wanted file.  
Then, click " Transmit ".  
  
 Obs.: To see on your own personal computer as the image really appears in
the waterfall, a loop cable must be used between " Line out " and " line in "
on the sound card, and " Setup, Options, External loop-back test " must be
enabled.  
If the sound card allows, it won't be necessary to use a cable, being enough
to activate the option " Mix " in the " Recording " window of the sound
card.  
The correct visualization depends a lot on the level of received signal
and it can be better with WF smoothing on (Ctrl+S).  
It is also better using the black and white palette for the " waterfall ",
(Ctrl+B).  
  
  
	IMPORTANT:  
  
 The PC video color resolution should be of 24 bits at least!  


=============================================================================



	Imagens no "waterfall"		



	Introduo.


 Esta parte do DIGTRX permite transformar uma imagem monocromtica em um
arquivo de udio, cujo contedo sonoro espectral, visualizado sob forma de
espectrograma num "waterfall",  traduzido na imagem original.

 Acredito que este  o primeiro programa para radioamadores a ter este
recurso. No  um novo modo de transmisso, pois se trata de uma evoluo
do Hellschreiber multitonal concorrente, que apenas transmite textos com
dois nveis de sinal, para um sistema capaz de transmitir imagens
monocromticas com vrios tons de cinza.

 Criei este sistema apenas com o intuito de EXPERIMENTAR, que  uma das
principais atribuies do radioamador, e tambm como curiosidade tcnica.

  claro que existem limitaes na definio da imagem, que no deve conter
muitos detalhes, mas a transmisso  relativamente rpida, comparada a modos
monocromticos equivalentes em SSTV.



	Utilizao.


 1 -  Clicando em "Open picture", escolher uma imagem adequada, sem muitos
detalhes, e que pode ser colorida. Ela ser transformada em uma imagem
monocromtica no formato de 130 por 200 pontos no mximo, mantendo a 
correta relao de aspecto.

 2 - O programa ajusta automaticamente o contraste e o brilho, mas permite
um ajuste fino manual, desde que as palavras "contrast" e "brightness"
fiquem verdes. A imagem  mostrada aproximadamente com vai aparecer no
"waterfall" e acima dela  mostrado um histograma do sinal de vdeo
correspondente, para facilitar os ajustes.

 3 - Se a imagem estiver bem ajustada, clicar em "Create". Ser criado um
arquivo de udio calculado a partir da imagem. Este arquivo ser salvo
automaticamente na pasta "precoded" com o mesmo nome da imagem original,
mas com extenso ".wfp", e pronta para transmisso a qualquer momento.

 4 - Para transmitir uma imagem j codificada, clicar em "Files, Quick
load precoded waterfall picture", e escolher o arquivo desejado.
Depois,  s apertar "Transmit".

 Obs.: Para verificar no prprio micro como a imagem aparece realmente no
"waterfall",  pode ser usado um cabo de loop entre "Line out" e "line in"
na placa de som e habilitando "Setup, Options, External loop-back test".
Se a placa de som o permitir, no ser preciso do cabo, bastando ativar a
opo " Mix " na tela de Gravao da placa de som.
A correta visualizao depende muito do nvel de sinal recebido e pode ser
melhor as vezes com "WF smoothing" ligado (Ctrl+S).
Fica melhor tambm com as cores (palette) do "waterfall" em preto e branco
(apertar Ctrl+B).


	IMPORTANTE :

 A resoluo de cores do video deve ser de 24 bits no minimo !





        73 de PY4ZBZ.