The FT-8000R Expanded TX Mod

Behind the front panel (LCD Display) of the radio were the Lithium battery is soldered. You will see a PC board

similar to the one below. There is a row of 15 jumpers. There is a larger component on the 4th and 6th position

from the left.

If you remove the component at the 6th from the left position and reset the radio you will have expanded TX.

This does not open the cellular block on the radio. It may be controlled by one of the other jumper locations

on this row of 15.

_______________________________________________________

| .............................................I.I.I.I.I.I.I.I.I.I.I.I.I.I.I..............................|

| ........................................................^................................................. |

| .........................................................|................... Lithium ..................|

| ..................................................Remove ..............Battery.................. |

| ...................................................R3028.............................. ___ ........|

| ............................................................................................[..... ]...... |

¦_._____________________________________________[___]__._|

.....................................................................................Mike Connector

For educational use only! Do not transmit outside the Amateur Bands! I am not responsible if you

damage your radio.