copied from packet: Sb: MODIFICATION OF TS-450SAT
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ [ [ [ GENERAL COVERAGE TRANSMISSION MODIFICATION FOR THE TS-450 AND TS-690 [ [ DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD [ [ A) Remove all screws of top and bottom case. [ [ [ [ B) Remove two screws of front panel (left and right top side),and loosen [ [ two screws of front panel (left and right bottom side). [ [ [ [ C) Remove all screws of digital unit ( X46-312X-XX ). [ [ [ [ D) Cut the chip diode D27 (RL73) on digital unit rear side. [ [ [ [ [ [ \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ [ [ [ \\ [ [ [ [ \__ __\ [ [ [ [ \_ Bat. _\ [ [ [ [ [ [ [ [ [ [ __\\__ \\\\\\\\\\\\ [ [ [ [ \\\\\ [ [ [ [ [ [ [_\_[ [ [ [ [ [ [ [ [ [ [ [ \ [ [ [ ->I- D27 (RL73) CUT THIS [ [ [ [ [ __ __ [\\\\\\\\\\_ ->I- D26 [ [ [ [ [\\\[ ->I- D25 [ [ [ [ ->I- D24 [ [ [ [ ->I- D23 [ [ [ [ ->I- D22 [ [ [ [ ->I- D21 [ [ [ [ ->I- D20 [ [ [ ________________________________________________________ [ [ DIGITAL JNIT (X46-312X-XX) Component side view [ [ [ [ This modification it is at your risk . [ [\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\[
============================================================================== I haven't tried or verified this, proceed at your own risk. And do not transmit outside of legal bands! WA2ISE
P.S. This modification has not been tested. I take NO responsibility or liability for any damage or violation resulting from this modification. --